So now the real body work begins… First order of business is to get the doors even with the rest of the body, then adjust the door gaps so that we have an even reveal around the door, then work … Continue reading
Category Archives: 1956 Dodge Sierra Wagon Build
Gallery
Fabricating a New Firewall
Now seemed like a great time to fill all the holes in the firewall before I did a lot more work on the front end. After removing the stock heater/defroster and fresh air equipment, I was left with some sizeable … Continue reading
Gallery
More Rust Repair
Time to finish the rest of the rust repair on the body. Same basic proceedure as before. However I did try a some new technology, new to me that is, that was recommended by a good friend of mine who … Continue reading
Gallery
Filling Holes in the Floor
After installing the Durango seats in the wagon, I was left with a bunch of 3/8″ holes in the floor where the stock Dodge seats and seat belts were mounted that needed to be filled. On one of my trips … Continue reading
On one of my trips to the valley, I stopped by the Matrix paint store to buy some epoxy and high build 2K primer. The store had a gallon kit of epoxy on sale for around $90 which was a … Continue reading
Gallery
Sand Blasting …
This was one of those things that could have gone better. Up in Taylor, there was a business that specialized in media blasting and powder coating aluminum panels for helicopters. Early on, I had talked with the owner and reviewed … Continue reading
Gallery
Dealing With Rusted Panels
Now we can get down to some fun work. In all of the cases below the procedure was the same for fabricating each patch panel: Identify the extent of the damage Remove damaged area using straight cuts if possible Make … Continue reading
Gallery
Some More New Tools!
After taking a better look at the rust damage, especially on the passenger side, I decided that I would have to make a number of patch panels to be able to end up with a decent repair. To help with … Continue reading
A few items that I needed to take care of before tackling all the rusted areas in the body and floor. Measuring Rear Wheel Clearance Thinking ahead, as it turns out, way ahead, I used my new Percy’s Wheel Rite … Continue reading
Now that I have the steering column, brake pedal and gas pedal installed I can set the driver’s seat position to allow a comfortable driving position. Once the driver’s is placed, then the passenger seat can be mounted so that … Continue reading